Blogs
BSP vs NPT Threads on Brass Inserts: How to Specify the Right Thread
BSP vs NPT on brass inserts: which threads seal on the thread, which need a gasket, and how to write the thread spec on your RFQ.
16 10 月, 2026
What Certifications Do PPR Valves Need for the EU Market?
PPR valves sold in the EU need drinking-water hygiene compliance under Directive (EU) 2020/2184, not just a CE logo. What importers should verify.
13 10 月, 2026
Hot Forged vs Machined-from-Bar Brass Inserts: What Changes for the Injection Molder
Hot forged brass inserts vs machined-from-bar: how the process changes alloy, geometry, lot size and what molders see at the press.
11 10 月, 2026
California AB 1953 and the 0.25% Lead Rule: What Importers Need to Know
Compliance US Market
16 9 月, 2026
WRAS vs NSF: Certifying Brass Fittings for UK/EU vs US Markets
Compliance Export Ma
16 9 月, 2026
Lead-Free Brass Explained: NSF/ANSI 61 vs NSF/ANSI 372
Compliance Brass All
15 9 月, 2026
Brass & Stainless Steel Insert Molding: The Complete Guide
FeniloInsert Molding
11 9 月, 2026
Brass Insert Failure Modes: How to Avoid Pull-Out, Leakage & Corrosion
FeniloInsert Molding
11 9 月, 2026