Our Factory in Yuhuan
We make brass fittings, inserts and valve parts in our own factory in Yuhuan, Zhejiang.

Distributors, OEM brands and plastic molders buy from us.
This page shows how a part gets made here, step by step.
See the five stepsFrom Brass Bar to Finished Part
01Brass stock
We start with brass bar and tube.
Cutting and turning
CNC lathes cut the thread, the groove and the shape. Most of our machines load parts by robot arm, so they can run long batches with the same result.


Checking
People measure parts by hand and by machine. We have a vision measuring machine, a hardness tester, a spectrometer for checking the metal, and test chambers.
- Hand measuring
- Vision measuring machine
- Hardness tester
- Spectrometer for checking the metal
- Test chambers
Hand measuring
Vision measuring
Spectrometer
Inspection room
Test chambers
Measuring stationSorting and marking
Workers pick through parts by hand to catch any bad ones. Parts can be laser-marked with your logo or model number.


Packing
We seal parts in bags and pack them in cartons by size.
The Machines
Our CNC work is more than 85% automated since 2021.


How We Got Here

We began by making brass inserts for PPR fittings.

Added PEX, copper and press fittings.

Opened a valve workshop and a zinc die-casting line.

Showed our products at BIG 5 in Dubai.

CNC lines are more than 85% automated.

Making Your Own Design
Send us a drawing and we can make the part from it. A 3D file or a sample works too. We start with a sample, you approve it, then we run the full order.