In inquiry list
2 series Brass PEX-AL-PEX Press Male Coupler, 16x1/2M to 32x1M
Male Coupler, made for connecting PEX-AL-PEX pipe with a press tool. It joins a pipe to a female-threaded part, with a male thread on one end.

We are a manufacturer of press fittings for PEX-AL-PEX pipe. Each fitting has a brass body and a stainless steel sleeve, and the range covers couplers, elbows, tees and wall plates in pipe sizes 16 to 32 mm.
In inquiry list
2 series Male Coupler, made for connecting PEX-AL-PEX pipe with a press tool. It joins a pipe to a female-threaded part, with a male thread on one end.
In inquiry list
2 series Female Coupler, made for connecting PEX-AL-PEX pipe with a press tool. It joins a pipe to a male-threaded part, with a female thread on one end.
In inquiry list
2 series Coupler. It joins two pipes in a straight line, for connecting PEX-AL-PEX pipe with a press tool.
In inquiry list
2 series Male Elbow for connecting PEX-AL-PEX pipe with a press tool. It turns the line 90 degrees and ends in a male thread.
In inquiry list
2 series Female Elbow. It turns the line 90 degrees and ends in a female thread, for connecting PEX-AL-PEX pipe with a press tool.
In inquiry list
2 series Elbow for connecting PEX-AL-PEX pipe with a press tool. It turns the line 90 degrees.
In inquiry list
2 series Male Tee for connecting PEX-AL-PEX pipe with a press tool. It splits the line and gives a male-threaded branch.
In inquiry list
2 series Female Tee. It splits the line and gives a female-threaded branch, for connecting PEX-AL-PEX pipe with a press tool.
In inquiry list
2 series Tee for connecting PEX-AL-PEX pipe with a press tool. It splits one line into two.
In inquiry list
2 series Wallplated Elbow. It is an elbow with mounting ears, so it can be screwed to a wall or board, for connecting PEX-AL-PEX pipe with a press tool.

The body is turned from CW617N brass on CNC lathes, with the stainless sleeve fitted over it. After machining, parts go through a vision measuring machine and a spectrometer, then workers sort them by hand. Our catalog gives a working pressure of 16 bar and a range of -10 to 110 °C. Finish is the natural brass color or nickel plating, without burrs.




You need a press tool with the right jaw for the pipe size.

Cut the pipe square.
Chamfer (ream) the pipe end.
Push the pipe into the fitting until it stops.
Press the stainless sleeve with the press tool.

Distributors order by the carton, one model and size to a carton, and mixed orders are no problem. Send a drawing or sample for a different body or thread. Ask for a quote and it will show the minimum order and lead time.
Ask for a Quote
01
02
03
04
01The body is CW617N brass with a stainless steel sleeve.
02Brass machines cleanly and holds a thread; the stainless sleeve takes the force of the press.
03Nickel plating gives a bright finish that also protects the surface.
Yes. A square cut and a chamfered end let the pipe slide in without damaging the seal.
No. A pressed sleeve is permanent. Use a compression fitting if you may need to take the joint apart.
Use the fitting made for your pipe. Plain PEX has its own range.
16, 20, 25 and 32 mm.

Give us the model, the pipe size and the quantity. A price and lead time come back from us. [询盘表单]
We reply by email.