Brass fittings & PPR valves manufacturer since 2009 · OEM & ODMYuhuan, Zhejiang, Chinasales@fenilo.com
Product ranges
All products292 models

Brass & Stainless Steel Inserts

Brass and stainless steel inserts for PPR, CPVC and UPVC fittings.

View all

PPR Valves & Fittings

PPR unions and ball, gate, stop and concealed valves with brass parts.

View all

Valve Components

Valve cartridges, headwork and extensions for valve makers.

View all

OEM & Custom Parts

Brass parts made to your drawing or sample, from prototype to mass production.

Learn more
  1. 01Send a drawing or a sample
  2. 02We quote and make a sample
  3. 03You approve, we mass produce
Start a custom part
Fittings and compression ball valves

PEX-AL-PEX Compression Fittings Manufacturer

We are a manufacturer of compression fittings and compression ball valves for PEX-AL-PEX pipe. The range has couplers, elbows, tees and wall plates in pipe sizes 16 to 32 mm, in brass with a nickel finish.

14models in this range
21101211022110321104
14 models16, 20, 25 and 32 mmIncludes 4 ball valves
PEX-AL-PEX Compression Fittings
Brass PEX-AL-PEX Compression Female Coupler, model 21102 In inquiry list
2110216x1/2"F – 32x1"F · 7 sizes

Brass PEX-AL-PEX Compression Female Coupler

Female Coupler. It joins a pipe to a male-threaded part, with a female thread on one end, for connecting PEX-AL-PEX pipe.

View details
PEX-AL-PEX Compression Fittings
Brass PEX-AL-PEX Compression Male Tee, model 21107 In inquiry list
2110716x1/2"Mx16 – 25x1"Mx25 · 5 sizes

Brass PEX-AL-PEX Compression Male Tee

Male Tee, made for connecting PEX-AL-PEX pipe. It splits the line and gives a male-threaded branch.

View details
PEX-AL-PEX Compression Fittings
Brass PEX-AL-PEX Compression Female Tee, model 21108 In inquiry list
2110816x1/2"Fx16 – 32x1"Fx32 · 7 sizes

Brass PEX-AL-PEX Compression Female Tee

Female Tee, made for connecting PEX-AL-PEX pipe. It splits the line and gives a female-threaded branch.

View details
PEX-AL-PEX Compression Fittings
Brass PEX-AL-PEX Compression Wallplated Elbow, model 21110 In inquiry list
211101/2 x 16 – 1/2 x 20 · 2 sizes

Brass PEX-AL-PEX Compression Wallplated Elbow

Wallplated Elbow. It is an elbow with mounting ears, so it can be screwed to a wall or board, for connecting PEX-AL-PEX pipe.

View details
Specifications

Specifications

Product photo
FENILO · DATA SHEETPEX-AL-PEX Compression Fittings
Pipe sizes16, 20, 25 and 32 mm
Thread sizes1/2", 3/4" and 1"
TypesCouplers, elbows, tees, wall plates, compression ball valves
MaterialCW617N brass
FinishNatural brass color or nickel plating, without burrs
Working pressure1.6 MPa (16 bar)
Working temperature-10 to 110 °C
Material standardEN12164
Other alloysOn request
Ask us for the full size list.
Manufacturer

How We Manufacture PEX-AL-PEX Compression Fittings

Nut, ring and body must fit each other closely. We turn all three on CNC lathes from CW617N brass and nickel-plate them. Workers sort the parts by hand before packing.

CNC lathesVision measuringSpectrometerHand sorting
More on the Manufacturing page
FENILO factory
Checking parts
Quality

Quality Checks

Vision measuring

A vision measuring machine checks the size of the nut, ring and body.

CHECKED
Metal check

A spectrometer reads the metal of each batch.

CHECKED
Hardness test

A hardness tester checks the parts.

CHECKED
Hand sorting

Workers go through them by hand before boxing.

CHECKED
Compare

Press or Compression?

A

Compression needs no press tool. You tighten the nut with spanners, so it works in a tight spot and for repairs. The joint can be undone and remade.

VS
B

Press is quicker once you own the tool, and a pressed sleeve is permanent. It suits long runs with many joints.

Many contractors keep both: press for the main run and compression for the last connection to a tap or valve.

Installation

How to Install

  1. 1

    Cut the pipe square.

  2. 2

    Ream and chamfer the pipe end so the ring slides on cleanly.

  3. 3

    Slide the nut, then the ring, onto the pipe.

  4. 4

    Push the pipe into the fitting until it stops.

  5. 5

    Tighten the nut by hand, then with a spanner until it is firm. Do not over-tighten.

Ball valves

Compression Ball Valves for PEX-AL-PEX

Our compression ball valves connect straight to PEX-AL-PEX pipe, with no transition adaptor in between. Fewer parts means fewer joints that can leak. The range has ends in compression by compression, compression by female thread and compression by male thread, and a concealed type that sits in the wall.

32024
32024

Concealed Compression Ball Valve CxC for PEX-AL-PEX Pipe

Concealed compression ball valve, compression by compression.

View details
32025
32025

Compression Ball Valve CxC for PEX-AL-PEX Pipe, 16x16 to 16x20

Compression ball valve, compression by compression.

View details
32026
32026

Compression Ball Valve CxF for PEX-AL-PEX Pipe

Compression ball valve, compression by female thread.

View details
32027
32027

Concealed Compression Ball Valve CxM for PEX-AL-PEX Pipe

Concealed compression ball valve, compression by male thread.

View details
Applications

Where They Are Used

Hot and cold water supply in homes and buildings
Radiator connections and heating pipework
Underfloor heating manifolds
Compressed air lines, if the pressure and temperature are within the rating
Brass bar stock
Materials

Materials and Finish

01The body is CW617N brass, a copper-zinc alloy that is easy to machine and holds a thread well.

02Nickel plating gives a bright finish and protects the surface.

03Other alloys are available on request, so tell us the grade you need.

Bulk supply

Bulk Supply for Distributors

Cartons are filled one model at a time, and one order can carry as many models as you need. Minimum order and lead time come with the quote.

By the cartonMixed modelsPacked by size
Cartons packed by size in the FENILO warehouse
Brass parts ready to pack
OEM & custom

OEM and Custom Parts

Send a drawing or sample if you need a different body, thread or pipe size. We can make the part to fit your system.

01Drawing or sample02Quote03Sample to check04Full order
See Custom & OEM
Drawing for a custom part
FAQ

FAQ

Can I reuse a compression ring?

Usually not. The ring is deformed when you tighten it, so fit a new ring after taking a joint apart.

Do I need thread tape?

Not on the compression joint. Tape is only for the threaded end of the fitting.

Can I use these on plain PEX pipe?

Use the fitting made for your pipe. Plain PEX has its own range of fittings.

What pipe sizes are covered?

16, 20, 25 and 32 mm. Check the size on the model.

Quote

Ask for a Quote on Compression Fittings for PEX-AL-PEX

Send the model, the pipe size and the quantity. We reply with a price and lead time. [询盘表单]

## 给您的备注

  • 1"规格表"里的内容全部来自您目录第 36–38 页(管径 16–32 毫米、螺纹 1/2"–1"、CW617N、16 bar、-10 到 110 °C、EN12164、镀镍、其他合金可按需)。
  • 2"怎么安装""用在哪里""Materials and Finish"里关于黄铜和镀镍的说明是行业通用说法,不是工厂规定。"压缩空气"那条加了"在额定压力和温度内"的限制。
  • 3"卡环一般只用一次""不需要生料带"是通用常识。

Ask for a quote

We reply by email.

滚动至顶部