In inquiry list
Brass Inlet Valve Insert for PPR Fittings, 3/8" to 1/2"
Inlet Valve Insert for molded-in use in plastic fittings. Dovetail groove design, so the plastic locks around it. Long, slim body, threaded along its length.
Female Insert for molded-in use in plastic fittings. Dovetail groove design, so the plastic locks around it. Flat round chrome-plated cover with a small brass thread hole in the center. Sizes: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2".
Female Insert for molded-in use in plastic fittings. Dovetail groove design, so the plastic locks around it. Flat round chrome-plated cover with a small brass thread hole in the center. Sizes: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2".
It is placed in the mold and the plastic is injected around it. The dovetail groove stops it from pulling out or turning.
NPT threads are available on request.
OEM and custom orders welcome. Send your drawing or sample for a quote.

See how a part goes from brass bar to finished fitting.
How we make it| Model | 10011 |
|---|---|
| Size | 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" |
| Material | Brass |
| Finish | Chrome-plated |
| Thread | NPT available on request |
| Category | Brass Inserts for PPR & CPVC Fittings |
Need a size, thread or marking that is not listed? Send us your drawing or a sample.
Our complete range of brass fittings, valves and plumbing system parts, with models and sizes. Preview it here or download the PDF to share with your team.
Other models in this range · 44 in total. Tap + to add several models to one inquiry.
Send the models, sizes and quantities. If you have a drawing or a sample photo, mention it and we will reply by email so you can attach it.